Netgear GSM4248P User Manual - Page 68

AV Line of Fully Managed Switches M4250 Series Main User Manual 10. In the Unicast Poll Interval field, specify the number of seconds between unicast poll requests expressed as a power of 2. to The range is from 6 to 10. The default is 6. 11. In the Broadcast Poll Interval field, specify the number of seconds between broadcast poll requests expressed as a power of 2. Broadcasts received prior to the expiry of this interval are discarded. The range is from 6 to 10. The default is 6. 12. In the Unicast Poll Timeout field, specify the number of seconds to wait for an SNTP response to a unicast poll request. The range is from 1 to 30. The default is 5. 13. In the Unicast Poll Retry field, specify the number of times to retry a unicast poll request to an SNTP server after the first time-out before the switch attempts to use the next configured server. The range is from 0 to 10. The default is 1. 14. In the Time Zone Name field, specify a time zone. In the Offset Hours and Offset Minutes fields, you can also specify the number of hours and number of minutes that the time zone is different from the Coordinated Universal Time (UTC). The time zone can affect the display of the current system time. Note: When you use an SNTP or NTP time server, the time data that is received from the server is based on the UTC, which is the same as Greenwich Mean Time (GMT). This might not be the time zone in which the switch is located. 15. In the Offset Hours field, specify the number of hours that the time zone is different from UTC. The range is from -12 to 14. The default is 0. 16. In the Offset Minutes field, specify the number of minutes that the time zone is different from UTC. The range is from 0 to 59. The default is 0. 17. Click the Apply button. Your settings are saved. 18. To save the settings to the running configuration, click the Save icon. Configure Switch System 68 Information Main User Manual