Netgear GSM4248P User Manual - Page 667

AV Line of Fully Managed Switches M4250 Series Main User Manual Note: An implicit deny all rule is included at the end of an ACL list. This means that if an ACL is applied to a packet, and if none of the explicit rules match, then the final implicit deny all rule applies and the packet is dropped. Add a rule for a basic IPv4 ACL To add a rule for a basic IPv4 ACL: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > ACL > Advanced > IP Rules. If no rules exists, the Basic ACL Rule Table shows the message No rules have been configured for this ACL. If one or more rule exists for the ACL, the rules display in the Basic ACL Rule Table. 6. From the ACL ID menu, select the IP ACL for which you want to add or a change a rule. For basic IP ACLs, this must be an ID in the range from 1 to 99. Manage Switch Security 667 Main User Manual