Netgear GSM4248P User Manual - Page 431

AV Line of Fully Managed Switches M4250 Series Main User Manual The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > IPv6 Multicast > IPv6 PIM > Interface Configuration. The Interface Configuration page displays. 6. Select whether to display physical interfaces, VLANs, or both by clicking one of the following links above the table heading: • 1: Only physical interfaces are displayed. This is the default setting. • VLANS: Only VLANs are displayed. • All: Both physical interfaces and VLANs are displayed. 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 8. From the Admin Mode menu, select Enable or Disable to enable or disable PIM for the interface. The default is Disable. 9. In the Hello Interval field, specify the period in seconds between the transmission of PIM hello messages on the interface. The range is from 0 to 18000. The default is 30. 10. In the Join/Prune Interval field, specify period in seconds at which PIM Join/Prune messages are transmitted on the interface. The range is from 0 to 18000. The default is 60. 11. From the BSR Border menu, select Enable or Disable to enable or disable the bootstrap router (BSR) border on the interface. Configure Multicast Routing 431 Main User Manual