Netgear GSM4248P User Manual - Page 435

AV Line of Fully Managed Switches M4250 Series Main User Manual The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > IPv6 Multicast > IPv6 PIM > Candidate RP Configuration. The Candidate RP Configuration page displays. 6. From the Interface menu, select the interface. 7. Select the check box for the PIM candidate RP. 8. Click the Delete button. Your settings are saved. The PIM candidate RP entry is removed. Configure an interface as an IPv6 PIM bootstrap router candidate You can configure an interface as an IPv6 PIM bootstrap router (BSR) candidate. To configure an interface as an IPv6 PIM BSR candidate: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > IPv6 Multicast > IPv6 PIM > BSR Candidate Configuration. The BSR Candidate Configuration page displays. 6. From the Interface menu, select an interface. 7. In the Hash Mask Length field, specify the hash mask length to be advertised in bootstrap messages. The hash mask length is used in the hash algorithm for selecting the RP for a particular group. The range is from 0 to 128. The default is 126. Configure Multicast Routing 435 Main User Manual