Netgear GSM4248P User Manual - Page 46

AV Line of Fully Managed Switches M4250 Series Main User Manual The following table describes the information in the USB Memory Statistics section. Table 9. USB Memory Statistics information Field Description Total Size The USB flash device storage size in bytes. Bytes Used The size of memory used on the USB flash device. Bytes Free The size of memory free on the USB flash device. The following table describes the information in the USB Directory Details section. Table 10. USB Directory Details information Field File Name File Size Modification Time Description The name of the file stored in the USB flash drive. The size of the file stored in the USB flash drive in bytes The last modification time of the file stored in the USB flash drive. Loopback interface You can create, configure, and remove loopback interfaces. To configure a loopback interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Configure Switch System 46 Information Main User Manual