Netgear GSM4248P User Manual - Page 489

AV Line of Fully Managed Switches M4250 Series Main User Manual The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Policy Configuration. The Policy Configuration page displays. 6. Select the check box next to the policy name. 7. Click the Delete button. The policy is removed. 8. To save the settings to the running configuration, click the Save icon. Configure the DiffServ service interface You can assign (attach) both an inbound policy and an outbound policy to an interface. Attach DiffServ policies to an interface To attach DiffServ policies to an interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Service Interface Configuration. The Service Interface Configuration page displays. 6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch): Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 7. Select one or more interfaces by taking one of the following actions: Configure Quality of Service 489 Main User Manual