Netgear GSM4248P User Manual - Page 708

AV Line of Fully Managed Switches M4250 Series Main User Manual The severity can be one of the following levels: • Emergency: Level 0, the highest warning level. If the device is down or not functioning properly, an emergency log is saved to the device. • Alert: Level 1, the second-highest warning level. An alert log is saved if a serious device malfunction occurs, such as all device features being down. • Critical: Level 2, the third-highest warning level. A critical log is saved if a critical device malfunction occurs, for example, two device ports are not functioning, while the rest of the device ports remain functional. • Error: Level 3, a device error occurred, such as a port being offline. • Warning: Level 4, the lowest level of a device warning. • Notice: Level 5, provides the network administrators with device information. • Informational: Level 6, provides device information. This is the default setting. • Debug: Level 7, provides detailed information about the log. Note: A log records messages equal to or above a configured severity threshold. 9. In the Threshold field, enter the percentage of log space that, if exceeded, causes logging to stop. Enter a percentage from 1 to 100. The default is 80. The threshold applies only if the selection from the Behavior menu is Stop-on-Full. By default, the default the selection from the Behavior menu is Wrap and the threshold does not apply. 10. Click the Apply button. Your settings are saved. The Memory Log table displays on the Memory Log page. The Total number of Messages field displays the number of messages the system logged in memory. By default, up to 160 (80 percent of the maximum of 200) of the most recent entries can be displayed on the page. The rest of the page displays the Memory Log messages. The format of the log message is the same for messages that are displayed for the message log, persistent log, or console log. Messages logged to a collector or relay through syslog support the same format as well. The following example shows the standard format for a log message: Jan 05 2021 00:00:18: AAA-5-CONNECT: New http connection for user admin, source 192.168.1.111 ACCEPTED Monitor the Switch and Network 708 Main User Manual