Netgear GSM4248P User Manual - Page 593

AV Line of Fully Managed Switches M4250 Series Main User Manual To remove primary and secondary VLANs from a private VLAN isolated trunk interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Traffic Control > Private VLAN > Private VLAN Isolated Trunk Interface Configuration. The Private VLAN Isolated Trunk Interface Configuration page displays. 6. From the Interface menu, select an interface or LAG for which you configured the VLAN port mode as Isolated Trunk mode. For more information about port VLAN modes, see Configure the private VLAN port mode on page 581. 7. Select the check box for the VLAN configuration. 8. Click the Delete button. Your settings are saved. The primary and secondary VLANs are removed from the selected interface. The VLANs themselves are not deleted. 9. To save the settings to the running configuration, click the Save icon. Configure native and allowed VLANs on a private VLAN trunk interface If you configure an interface as either a private VLAN promiscuous interface or a private VLAN isolated trunk interface, you can also allow untagged traffic from a native VLAN on the same trunk interface. By default, VLAN 1 is both the default and the native VLAN, but you can configure another VLAN as the native VLAN (see Configure the switch port mode settings for interfaces on page 196). Manage Switch Security 593 Main User Manual