Netgear GSM4248P User Manual - Page 242

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 61. MST interface configuration information (Continued) Field Description Designated Root The bridge identifier of the root bridge, which is created by using the bridge priority and the base MAC address of the bridge Designated Cost The path cost offered to the LAN by the designated port. Designated Bridge The bridge identifier of the bridge with the designated port. This identifier is created from the bridge priority and the base MAC address of the bridge. Designated Port The port identifier on the designated bridge that offers the lowest cost to the LAN. This identifier is created from the port priority and the interface number of the port. Loop Inconsistent State Indicates if the interface is in a loop-inconsistent state. (False or True.) Transitions Into Loop Inconsistent The number of times the interface transitioned into the loop-inconsistent State state. Transitions Out Of Loop Inconsistent State The number of times the interface transitioned out of the loop-inconsistent state. Display the STP interface statistics You can display information about the number and type of bridge protocol data units (BPDUs) that are transmitted and received on each interface. To display the STP interface statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Configure Switching Information 242 Main User Manual