Netgear GSM4248P User Manual - Page 609

AV Line of Fully Managed Switches M4250 Series Main User Manual 6. Select the check box for the VLAN. 7. From the DHCPv6 Snooping Mode menu, select Enable. 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Configure DHCPv6 snooping interface settings You can display and configure each port as a trusted or untrusted port. Any DHCPv6 responses received on a trusted port are forwarded. If a port is configured as untrusted, any DHCPv6 (or BootP) responses received on that port are discarded. To configure DHCPv6 snooping interface settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Control > DHCPv6 Snooping > Interface Configuration. The Interface Configuration page displays. 6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch): Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. Manage Switch Security 609 Main User Manual