Netgear GSM4248P User Manual - Page 481

AV Line of Fully Managed Switches M4250 Series Main User Manual the page). 11. Configure the policy attributes by selecting one of the following radio buttons: • Assign Queue: Select this radio button to specify that traffic must be assigned to a queue, which you must select from the menu. The queue is expressed as a value in the range from 0 to 7. • Drop: Select this radio button to require each packet to be dropped. • Mark VLAN CoS: Select this radio button to specify the VLAN priority, which you must select from the menu. The VLAN priority is expressed as a value in the range from 0 to 7. • Mark CoS As Secondary CoS: Select this radio button to specify that the outer VLAN tag priority bits of packets are set as the inner VLAN tag priority. That is, for these packets, the inner VLAN tag CoS is copied to the outer VLAN tag CoS. • Mark IP Precedence: Select this radio button to require packets to be marked with an IP precedence value before being forwarded. You must select an IP precedence value from 0 to 7 from the menu. • Mirror: Select this radio button to require packets to be mirrored to an interface or LAG, one of which you must select from the menu. • Redirect: Select this radio button to require packets to be redirected to an interface or LAG, one of which you must select from the menu. Configure Quality of Service 481 Main User Manual