Netgear GSM4248P User Manual - Page 488

AV Line of Fully Managed Switches M4250 Series Main User Manual 9. To save the settings to the running configuration, click the Save icon. Change or remove a class from an existing DiffServ policy To change or remove a class from an existing DiffServ policy: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Policy Configuration. The Policy Configuration page displays. 6. Select the check box next to the policy name. 7. Do one of the following: • To change the class, select another class rom the Member Class menu. • To remove the class, select None, from the Member Class menu. 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Delete a DiffServ policy To delete a DiffServ policy: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. Configure Quality of Service 488 Main User Manual