Netgear GSM4248P User Manual - Page 276

AV Line of Fully Managed Switches M4250 Series Main User Manual To configure the settings for MLD snooping for a VLAN manually: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > Multicast > MLD Snooping > MLD VLAN Configuration. The MLD VLAN Configuration page displays. 6. Either specify a new VLAN or change an existing VLAN: • Specify a new VLAN: In the VLAN ID field, enter the ID for a new VLAN. • Change an existing VLAN: Select the check box for an existing VLAN. 7. From the Fast Leave menu, select to enable or disable the MLD snooping Fast Leave mode. 8. In the Membership Interval field, specify the period for the group membership interval of MLD snooping. The range is from the period that you specify in the Maximum Response Time field plus 1 to 3600 seconds. The default is 260 seconds. 9. In the Maximum Response Time field, specify the period for the maximum response time of MLD snooping. The range is from 1 second to the period that you specify in the Membership Interval minus 1. The default is 10 seconds. 10. In the Multicast Router Expiry Time field, specify the period for the multicast router expiration time of MLD Snooping. The range is from 0 to 3600 seconds. The default is 300 seconds. 11. From the Proxy Querier Mode menu, select to enable or disable the proxy querier mode. If you select Disable, the MLD proxy query with source IP 0::0 is not sent in response to an MLD leave packet. The default value is Enable. Configure Switching Information 276 Main User Manual