HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 130

2. Enter the following command: switch:admin> fddcfg --showall Local Switch Configuration for all Databases:- DATABASE - Accept/Reject SCC - accept DCC - accept PWD - accept FCS - accept AUTH - accept IPFILTER - accept Fabric Wide Consistency Policy:- "" To enable local switch protection: 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the following command: fddCfg --localreject localrejec Refuse the databases distributed from other switches. Cannot distribute local t database, manually or automatically, to other switches. database_i A semicolon-separated list of the local databases to be distributed; see d Table 34 on page 129 for a list of identifiers. To disable local switch protection: 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the following command: fddCfg --localaccept localaccept Default setting. Allows local database to be overwritten with databases received from other switches. Allows local database to be manually or automatically distributed to other switches. database_id A semicolon-separated list of the local databases to be distributed; see Table 34 on page 129 for a list of identifiers. Distributing ACL policies to other switches This section explains how to manually distribute local ACL policy databases to Fabric 5.2.0 and later switches. The distribute command has the following dependencies: • All target switches must be running Fabric OS 5.2.0 or later. • All target switches must accept the database distribution (see "Configuring the database distribution settings" on page 129). • The fabric must have a tolerant or no (absent) fabric-wide consistency policy (see "Setting the consistency policy fabric-wide" on page 131). If the fabric-wide consistency policy for a database is strict, the database cannot be manually distributed. When you set a strict fabric-wide consistency policy for a database, the distribution mechanism is automatically invoked whenever the database changes. • The local distribution setting must be accepted. To be able to initiate the distribute command, set the local distribution to accept. 130 Configuring advanced security features