HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 230

type of CP blade installed and that each CP (primary and secondary partition) maintains the same firmware version. Core blades The DC Director supports two CR8 core blades. This blade is used for intra-chassis switching as well as ICL connectivity to another DC Director chassis. The 4/256 Director does not support core blades. Port blade compatibility Table 65 identifies which port blades are supported for each Director. Table 65 Port blades supported by each Director Port blades Director 4/256 Director (CP4) FC2-16 Supported1 FC4-16 Supported FC4-32 Supported FC4-48 Supported FC8-16 Supported FC8-32 Supported FC8-48 Supported FC10-6 Supported FC4-16IP Supported 1. Can coexist only with FC4-16 blades. DC Director N/A N/A N/A N/A Supported Supported Supported Supported N/A Setting chassis configuration options for the 4/256 Director The chassisConfig command allows you to display or set the chassis configuration on the 4/256 Director. The 4/256 Director allows you to use chassis configuration options 1 and 5. Configuration option 1 is compatible with FC4-16 blades; configuration option 5 is compatible with FC8-16, FC4-16IP, FC4-16, FC4-32, FR4-18i, and FC4-48 blades. The DC Director does not have separate configuration options, so the chassisConfig command is not supported on this platform. By default the DC Director supports 384 ports in a single Fibre Channel domain. Table 66 lists the supported configuration options for the 4/256 Director. Table 66 Supported configuration options Option Number Maximum of number of ports domains per switch Supported port blades Supported Notes CP blades 1 1 128 FC2-16, FC4-16 CP2 or CP4 5 1 384 FC4-16, FC8-16, CP4 FC4-16IP, FC4-32, FC4-481, FR4-18i, FC8-32, FC8-48 and FC10-6 Option 5 is the default configuration option for 4/256 Director. 1. L_Ports are not supported on the FC4-48 blade. 230 Configuring Directors