HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 163

3. Enter the ad --activate option. The activate option prompts for confirmation. On default, after the Admin Domain is activated, the devices specified under that AD are not able to see each other until they are zoned together. 4. To end the transaction now, enter ad --save to save the Admin Domain definition or enter ad --apply to save the Admin Domain definition and directly apply the definitions to the fabric. The following example activates Admin Domain AD_B5. sw5:AD255:admin> ad --activate AD_B5 You are about to activate a new admin domain. Do you want to activate 'AD_B5' admin domain (yes, y, no, n): [no]: y sw5:AD255:admin> To deactivate an Admin Domain: If you deactivate an Admin Domain, the members assigned to the Admin Domain can no longer access their hosts or storage unless those members are part of another Admin Domain. You cannot log in to an Admin Domain that has been deactivated. You must activate an Admin Domain before you can log in to it. 1. Connect to the switch and log in as admin. 2. Disable the zone configuration under the Admin Domain you want to deactivate. 3. Switch to the AD255 context, if you are not already in that context. ad --select 255 4. Enter the ad --deactivate option. ad --deactivate ad_id You are then prompted for confirmation. 5. To end the transaction now, enter ad --save to save the Admin Domain definition or enter ad --apply to save the Admin Domain definition and directly apply the definitions to the fabric. All active user sessions associated with the Admin Domain are terminated. The deactivate option does not disable ports. The following example deactivates Admin Domain AD_B4. sw5:AD255:admin> ad --deactivate AD_B4 You are about to deactivate an AD. This operation will fail if an effective zone configuration exists in the AD Do you want to deactivate 'AD_B5' admin domain (yes, y, no, n): [no] y sw5:AD255:admin> Adding and removing Admin Domain members Use the following procedures to add or remove members of an Admin Domain. NOTE: If you remove the last member of an Admin Domain, that Admin Domain is automatically deleted. To add members to an existing Admin Domain: 1. Connect to an AD-aware switch and log in as admin. 2. Switch to the AD255 context, if you are not already in that context. ad --select 255 3. Enter the ad --add command using the -d option to specify device and switch port members and the -s option to specify switch members: ad --add ad_id -d "dev_list" -s "switch_list" where ad_id is the Admin Domain name or number, dev_list is a list of device WWNs or domain,port members, and switch_list is a list of switch WWNs or Domain IDs. 4. To end the transaction now, enter ad --save to save the Admin Domain definition or enter ad --apply to save the Admin Domain definition and directly apply the definitions to the fabric. Fabric OS 6.1.x administrator guide 163