HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 245
Adding a member to the ACL
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 done ... switch:admin> Adding a member to the ACL 1. Connect to the switch and log in as admin. 2. Enter the msConfigure command. The command becomes interactive. 3. At the select prompt, enter 2 to add a member based on its port/node WWN. 4. Enter the WWN of the host to be added to the ACL. 5. At the prompt, enter 1 to display the access list so you can verify that the WWN you entered was added to the ACL. 6. After verifying that the WWN was added correctly, enter 0 at the prompt to end the session. 7. At the "Update the FLASH?" prompt, enter y. 8. Press Enter to update the nonvolatile memory and end the session. switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 2 Port/Node WWN (in hex): [00:00:00:00:00:00:00:00] 20:00:00:20:37:65:ce:aa *WWN is successfully added to the MS ACL. 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [2] 1 MS Access List consists of (14): { 20:00:00:20:37:65:ce:aa 20:00:00:20:37:65:ce:bb 20:00:00:20:37:65:ce:ff 20:00:00:20:37:65:ce:11 20:00:00:20:37:65:ce:22 20:00:00:20:37:65:ce:33 20:00:00:20:37:65:ce:44 10:00:00:60:69:04:11:24 10:00:00:60:69:04:11:23 21:00:00:e0:8b:04:70:3b 10:00:00:60:69:04:11:33 20:00:00:20:37:65:ce:55 20:00:00:20:37:65:ce:66 00:00:00:00:00:00:00:00 } 0 Done Fabric OS 6.1.x administrator guide 245