HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 215

Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y To clear changes to a configuration: 1. Enter the cfgTransAbort command. When this command is executed, all changes since the last save operation (performed with the cfgSave command) are cleared. In the following example, assume that the removal of a member from zone1 was done in error: switch:admin> zoneremove "zone1","3,5" switch:admin> cfgtransabort To view all zone configuration information: If you do not specify an operand when executing the cfgShow command to view zone configurations, then all zone configuration information (both defined and effective) displays. If there is an outstanding transaction, then the newly edited zone configuration that has not yet been saved is displayed. If there are no outstanding transactions, then the committed zone configuration displays. 1. Connect to the switch and log in as admin. 2. Enter the cfgShow command with no operands. switch:admin> cfgshow Defined configuration: cfg: USA1 Blue_zone cfg: USA_cfg Red_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Red_zone 1,0; loop1 alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02 alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28 alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df Effective configuration: cfg: USA_cfg zone: Blue_zone 1,1 21:00:00:20:37:0c:76:8c 21:00:00:20:37:0c:71:02 1,2 21:00:00:20:37:0c:76:22 21:00:00:20:37:0c:76:28 zone: Red_zone 1,0 21:00:00:20:37:0c:76:85 21:00:00:20:37:0c:71:df To view selected zone configuration information: 1. Connect to the switch and log in as admin. 2. Enter the cfgShow command and specify a pattern. cfgshow "pattern"[, mode] The values represent the following: pattern A POSIX-style regular expression used to match zone configuration names. mode Specify 0 to display the contents of the transaction buffer (the contents of the current transaction), or specify 1 to display the contents of the nonvolatile memory. The default value is 0. Fabric OS 6.1.x administrator guide 215