HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 269

Deleting user names from an iSCSI VT binding list User names can be deleted from the list of bound user names. 1. Connect and log in to the switch. 2. Enter the isciCfg - -deleteusername tgt command with the -t and -u options to delete a user name: switch:admin> iscsicfg --deleteusername tgt -t iqn.2002-10.com.brocade:tgt -u isisctgt1 This operation completed successfully Displaying CHAP configurations You can display a list of the user names that have been set up on the fabric for iSCSI initiator authentication. 1. Connect and log in to the switch. 2. Enter the iscsiCfg --show auth command: switch:admin> iscsicfg --show auth Number of records found: 1 Name Status username0001 Defined Committing the iSCSI-related configuration After you have configured iSCSI-related configuration parameters, including iSCSI VTs, discovery domains, discovery domain sets, and CHAP authentication, after they have been defined, you must save them through a commit process. Each set of changes, additions, and deletions is called a "transaction." Review the current transaction before committing the changes; once the changes are committed, they are enforced fabric-wide. The commit process option triggers propagation of the database to all iSCSI-capable platforms in the fabric and commits the changes. IMPORTANT: Make all necessary changes to the database-VT creation, LUN additions, DD creation, DDSet creation, and so on-before issuing the iscsiCfg --commit all command. 1. Connect and log in to the switch. 2. Enter the iscsiCfg --show transaction command to display the pending transactions: switch:admin> iscsicfg --show transaction Active transaction ID is: 10490 and the owner is: CLI. The following groups have been modified: 1. Auth. group. 2. Target/LUN group. 3. DD/DDSet group. 3. Enter the iscsiCfg --commit all command to save the transactions: switch:admin> iscsicfg --commit all This will commit ALL database changes made to all iSCSI switches in fabric. This could be a long-running operation. Continue (yes, y, no, n) [n]: y The operation completed successfully. 4. Enter the iscsiCfg --show transaction command to verify that the changes were committed: switch:admin> iscsicfg --show transaction There is no active transaction Fabric OS 6.1.x administrator guide 269