HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 267
Displaying iSCSI initiator IQNs, Creating discovery domains, Creating and enabling a discovery
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Displaying iSCSI initiator IQNs All iSCSI componenets in a DD must be identified using IQNs. Fabric OS temporarily stores the IQNs and IP addresses of iSCSI initiators that have logged in the gateway. NOTE: If an iSCSI initiator has more than one IP address, only one of the IP addresses is displayed. 1. Connect and log in to the switch. 2. Enter the iscsiCfg --show initiator command to display iSCSI initiator IQNs. switch:admin> iscsicfg --show initiator Number of records found: 1 Name iqn.1991-05.com.microsoft:host001.brocade.com Creating discovery domains IP Address 30.0.30.11 1. Connect and log in to the switch. 2. Enter the iscsiCfg --create dd command with the -d option to define the discovery domain. switch:admin> iscsicfg --create dd -d dd-host001 -m \ "iqn.1991-05.com.microsoft:host001.brocade.com,iqn.2006-10.com.example:disk001" The operation completed successfully. 3. To verify enter the iscsiCfg --show dd command: switch:admin> iscsicfg --show dd Number of records found: 1 Name: dd-host001 Status: Defined Num. Members: 2 iqn.1991-05.com.microsoft:host001.brocade.com iqn.2006-10.com.example:disk001 Creating and enabling a discovery domain sets 1. Connect and log in to the switch. 2. Enter the iscsiCfg --create ddset command with the -n and -d options to create a new DDSet: switch:admin> iscsicfg --create ddset -n ddset-engineering -d dd-host001 The operation completed successfully. 3. Enter the iscsiCfg --show ddset command with the -v option to verify the DDSet. switch:admin> iscsicfg --show ddset -v Number of records found: 1 Name: ddset-engineering State/Status: disabled/Defined Num. members: 1 dd-host001 iqn.1991-05.com.microsoft:host001.brocade.com iqn.2006-10.com.example:disk001 4. Enter the iscsiCfg --enable ddset command with the -n option to enable the DDSet: switch:admin> iscsicfg --enable ddset -n ddset-engineering This will enable the DDSet specified. Continue (yes, y, no, n) [n]: y The operation completed successfully. Fabric OS 6.1.x administrator guide 267