HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 372
Enabling the DCC policy on trunk
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
20 20 -- N8 No_Module 21 21 -- N8 No_Module 22 22 -- N8 No_Module 23 23 -- N8 No_Module 24 24 -- N8 No_Module 25 25 -- N8 No_Module 26 26 -- N8 No_Module 27 27 -- N8 No_Module 28 28 -- N8 No_Module 29 29 -- N8 No_Module 30 30 -- N8 No_Module 31 31 -- N8 No_Module 32 32 id N4 No_Light 33 33 id N4 No_Light 34 34 id N4 No_Light 35 35 id N4 No_Light 36 36 id N4 Online 37 37 id N4 Online 38 38 id N4 Online 39 39 id N4 Online 5. Display TA enabled port configuration: F-Port 2 NPIV public (Trunk master) F-Port (Trunk port, master is Port 36 ) F-Port (Trunk port, master is Port 36 ) F-Port (Trunk port, master is Port 36 ) switch:admin> porttrunkarea --show enabled Port Type State Master TA DA 36 F-port Master 36 37 36 37 F-port Slave 36 37 37 38 F-port Slave 36 37 38 39 F-port Slave 36 37 39 6. Display the trunking information: For example to display trunk details for a user assigned TA 37 that includes ports 36-39: switch:admin> porttrunkarea --show trunk Trunk Area 37: 36->23 sp: 4.000G bw: 16.000G deskew 16 MASTER 39->22 sp: 4.000G bw: 4.000G deskew 15 38->21 sp: 4.000G bw: 4.000G deskew 16 37->20 sp: 4.000G bw: 4.000G deskew 16 Enabling the DCC policy on trunk 1. After you assign a Trunk Area, the portTrunkArea CLI checks whether there are any active DCC policies on the port with the index TA, and then issues a warning to add all the device WWNs to the existing DCC policy with index as TA. All DCC policies that refer to an Index that no longer exist will not be in effect. 2. Add the WWN of all the devices to the DCC policy against the TA. 3. Issue the secPolicyActivate command to activate the DCC policy. You must enable the TA before issuing the secPolicyActivate command in order for security to enforce the DCC policy on the trunk ports. 4. Turn on the trunk ports. Trunk ports should be turned on after issuing the secPolicyActivate command to prevent the ports from becoming disabled in the case where there is a DCC security policy violation. 372 Administering ISL Trunking