HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 345

where: monitor_class slotnumber portnumber monitorId The monitor class, which can be one of EE (end-to-end), FLT (filter-based), or ISL (inter-switch link). The --class monitor_class operand is required. For bladed systems only, specifies the slot number of the port on which the monitor counter is to be cleared. For all other switches, this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number and port number. Specifies a port number. Valid values for port number vary, depending on the switch type. This operand is required. Specifies the monitor number to clear. Monitor numbers are defined when you create the monitor on a port. This operand is optional. If not specified, all monitor counters on the port are cleared. This operand does not apply to ISL monitors. The following example clears statistics counters for an end-to-end monitor: switch:admin> perfMonitorClear --class EE 1/2 5 End-to-End monitor number 5 counters are cleared switch:admin> perfMonitorClear --class EE 1/2 This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n): [no] y The following example clears statistics counters for a filter-based monitor: switch:admin> perfMonitorClear --class FLT 1/2 4 Filter-based monitor number 4 counters are cleared switch:admin> perfMonitorClear --class FLT 1/2 This will clear ALL filter-based monitors' counters on port 2, continue? (yes, y, no, y): [no] y The following example clears statistics counters for an ISL monitor: switch:admin> perfMonitorClear --class ISL 1 This will clear ISL monitor on port 1, continue? (yes, y, no, n): [no] y Fabric OS 6.1.x administrator guide 345