HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 363
Setting the same speed for all ports on the switch
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
portcfgspeed [slotnumber/]portnumber, speed_level slotnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). This operand is only required for Directors. portnumber Specifies the port number relative to its slot for bladed systems. speedlevel Specifies the speed of the link: • 0-Autonegotiating mode. The port automatically configures for the highest speed. • 1-one Gbps mode. Fixes the port at a speed of one Gbps. Changing the speed to one Gbps causes the port to be excluded from the trunk group. • 2-two Gbps mode. Fixes the port at a speed of two Gbps. • 4-four Gbps mode. Fixes the port at a speed of four Gbps. (HP StorageWorks 4/8 SAN Switch, 4/16 SAN Switch, Brocade 4Gb SAN Switch for HP p-Class BladeSystem, Brocade 4Gb SAN Switch for HP c-Class BladeSystem, SAN Switch 4/32, 4/64 SAN Switch, SAN Switch 4/32B, 400 Multi-protocol Router and 4/256 SAN Director only) • 8-eight Gbps mode. Fixes the port at a speed of eight Gbps. (HP StorageWorks 4/256 SAN Director, 8/8 SAN Switch, 8/24 SAN Switch, 8/40 SAN Switch, and 8/80 SAN Switch and DC Directors enterprise-class platforms with supported blades and 8 Gbps SFPs installed only.) The following example sets the speed for port 3 on slot 2 to two Gbps: switch:admin> portcfgspeed 2/3 2 done. switch:admin> The following example sets the speed for port 3 on slot 2 to autonegotiate: switch:admin> portcfgspeed 2/3 0 done. switch:admin> Setting the same speed for all ports on the switch 1. Connect to the switch and log in as admin. 2. Enter the switchCfgSpeed command. The format is: switchcfgspeed speedlevel speedlevel Specifies the speed of the link: • 0-Auto-negotiating mode. The port automatically configures for the highest speed. • 1-one Gbps mode. Fixes the port at a speed of one Gbps. Changing the speed to one Gbps causes the port to be excluded from the trunk group. • 2-two Gbps mode. Fixes the port at a speed of two Gbps. • 4-four Gbps mode. Fixes the port at a speed of four Gbps. (HP StorageWorks 4/8 SAN Switch, 4/16 SAN Switch, Brocade 4Gb SAN Switch for HP p-Class BladeSystem, Brocade 4Gb SAN Switch for HP c-Class BladeSystem, SAN Switch 4/32, 4/64 SAN Switch, SAN Switch 4/32B, 400 Multi-protocol Router and 4/256 SAN Director only) • 8-eight Gbps mode. Fixes the port at a speed of eight Gbps. (HP StorageWorks 4/256 SAN Director, 8/8 SAN Switch, 8/24 SAN Switch, 8/40 SAN Switch, and 8/80 SAN Switch and DC Directors enterprise-class platforms with supported blades and 8 Gbps SFPs installed only.) Fabric OS 6.1.x administrator guide 363