HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 138
Example of setting up LDAP for FIPS mode, Example of setting the DNS
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Example of setting up LDAP for FIPS mode switch:admin> aaaconfig --add GEOFF5.ADLDAP.LOCAL -conf ldap -d 389 -t 3 switch:admin> aaaconfig --authspec "ldap;local" switch:admin> aaaconfig -show RADIUS CONFIGURATIONS RADIUS configuration does not exist. adldap.local -p LDAP CONFIGURATIONS Position Server Port Domain Timeout(s) : 1 : GEOFF5.ADLDAP.LOCAL : 389 : adldap.local : 3 Primary AAA Service: LDAP Secondary AAA Service: Switch database 2. Configure the DNS on the switch by using the dnsConfig command. Example of setting the DNS switch:admin> dnsconfig Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 Remove DNS configuration 4 Quit Select an item: (1..4) [4] 2 Enter Domain Name: [] domain.com Enter Name Server IP address in dot notation: [] 123.123.123.123 Enter Name Server IP address in dot notation: [] 123.123.123.124 DNS parameters saved successfully Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 Remove DNS configuration 4 Quit Select an item: (1..4) [4] 4 Specify the DNS IP address using either IPv4 or IPv6. This is needed for the switch to resolve the domain name to the IP address as LDAP initiates a TCP session to connect to your Microsoft Active Directory server. A Fully Qualified Domain Name (FQDN) is needed to validate the server identity as mentioned in the common name of the server certificate. 3. Set up LDAP according to the instructions in "LDAP configuration and Microsoft's Active Directory" on page 66. 138 Configuring advanced security features