HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 255

Supported iSCSI initiators Table 69 Supported iSCSI initiators iSCSI initiator driver versions Windows • MS iSCSI initiator 2.02 • MS iSCSI initiator 2.03 • MS iSCSI initiator 2.04 Linux • RH EL 4 default initiator • 2.6.10 - 4.0.2 iSCSI initiator (SourceForge,Net initiator) • 2.4.20 - 3.6.2 iSCSI initiator (SourceForge,Net initiator) • SUSE 9 • SUSE 10 Solaris • iSCSI is built-in with the 5.11 with the latest Solaris Express release AIX • iSCSI is built-in in the 5.3 ML4 HP-UX • 11i v1 - B.11.23.03e • 11 iv2 - B.11.23.03e NIC/TOE cards iSCSI HBAs • Alacritech SES2002XT • Qlogic 4050c Checklist for configuring iSCSI Configure the iSCSI gateway service after you install the FC4-16IP blade in the 4/256 SAN Director. The following table provides a high-level overview of the commands and links to the sections that detail the procedures. See the Fabric OS Command Reference for detailed information on the commands. Table 70 iSCSI target gateway configuration steps Step Command Procedure 1 Activate iSCSI for the FC4-16IP. fosConfig - -enable iscsi 2 Configure the IP address portCfg ipif /ge for GbE port(s). create 3 Optional) Configure the portCfg iproute IP route for the GbE /ge args port(s). 4 (Easy) Automatically iscsiCfg - -easycreate tgt maps FC targets to iSCSI targets and names target with unique IQN. 5 (Advanced) Create iSCSI virtual target. iscsiCfg - -create tgt -t 6 Add LUNs to the virtual iscsiCfg - -add lun -t target. \ -w -l "Enabling the iSCSI gateway service" on page 258 "Configuring the GbE interface" on page 259 "Configuring the GbE interface" on page 259 "Automatic iSCSI VT creation" on page 261 "Manual iSCSI VT creation" on page 263 Fabric OS 6.1.x administrator guide 255