HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 205
Fabric OS, Command Reference, domain,port
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y \ To remove members from an alias: 1. Connect to the switch and log in as admin. 2. Enter the aliRemove command, using the following syntax: aliremove "aliasname", "member[; member...]" The values represent the following: aliasname The name of the zone alias. member A member or list of members to be removed from the alias. An alias member can be specified by one or more of the following methods: • A domain,port pair. • Device node or device port WWN 3. Enter the cfgSave command to save the change to the defined configuration. switch:admin> aliremove "array1", "1,2" switch:admin> aliremove "array2", "21:00:00:20:37:0c:72:51" switch:admin> aliremove "loop1", "4,6" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y NOTE: For Fabric OS versions earlier than 4.4.0, when using the aliRemove command, the order in which the members appear in the list is critical. For more information on this command, see the Fabric OS Command Reference. To delete an alias: 1. Connect to the switch and log in as admin. 2. Enter the aliDelete command, using the following syntax. alidelete "aliasname" The value represents the following: aliasname The name of the zone alias to be deleted. Fabric OS 6.1.x administrator guide 205