HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 183

[8]: Thu Jul 28 00:37:50 2005 Slot 7 : Firmware commit is started. [9]: Thu Jul 28 00:37:50 2005 Slot 2 : Firmware commit has completed. [10]: Thu Jul 28 00:37:50 2005 Slot 7 : Firmware commit has completed. (Firmwaredownload has completed.) 11. Enter the firmwareShow command to display the new firmware versions. Following is an example of firmwareShow output on the 4/256 SAN Director. switch:admin> firmwareshow Slot Name Appl Primary/Secondary Versions Status 2 FC4-16 FOS 5.3.0 5.3.0 5 CP0 FOS 5.3.0 Standby * 5.3.0 6 CP0 FOS 5.3.0 Active 5.3.0 7 FC4-16 FOS 5.3.0 5.3.0 * Local CP Note: If Local CP and Remote CP have different versions of firmware, please retry firmwaredownload command. FirmwareDownload from a USB device NOTE: The USB device ships with the DC Director only. The 8/8 SAN Switch, 8/24 SAN Switch, 8/40 SAN Switch, 8/80 SAN Switch and the DC Director support a firmware download from an HP branded USB device attached to the switch or active CP. Before the USB device can be accessed by the firmwareDownload command, it must be enabled and mounted as a file system. The firmware images to be downloaded must be stored under the relative path from /usb/usbstorage/brocade/firmware or use the absolute path in the USB file system. Multiple images can be stored under this directory. There is a firmwarekey directory where the public key signed firmware is stored. When the firmwareDownload command line option, -U (upper case), is specified, the firmwareDownload command will download the specified firmware image from the USB device. When specifying a path to a firmware image in the USB device, you can only specify the relative path to /firmware or the absolute path. Enabling USB To enable the USB: 1. Log in to the switch using an account assigned to the admin role. 2. Type the following command: usbstorage -e Viewing the USB file system 1. Log in to the switch using an account assigned to the admin role. 2. Type the usbStorage -l command: BrcdDCXBB:admin> usbstorage -l firmware\ 381MB 2007 Sep 28 15:33 Fabric OS 6.1.x administrator guide 183