HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 332

Table 73 lists commands associated with Advanced Performance Monitoring. Advanced Performance Monitor commands are available only to users with the admin or switchAdmin roles. For detailed information on these commands, see the Fabric OS Command Reference. Table 73 Advanced Performance Monitoring commands Command Description perfAddEEMonitor Add an end-to-end monitor to a port. perfAddIPMonitor Add an IP monitor to a port. perfAddReadMonitor Add a SCSI Read monitor to a port. perfAddRwMonitor Add a SCSI Read and Write monitor to a port. perfAddSCSIMonitor Add a SCSI traffic frame monitor to a port. perfAddUserMonitor Add a filter-based monitor to a port. perfAddWriteMonitor Add a SCSI Write monitor to a port. perfCfgClear Clear the performance monitoring settings from nonvolatile (flash) memory. perfCfgRestore Restore performance monitoring settings from nonvolatile (flash) memory. perfCfgSave Save the current performance monitoring settings to nonvolatile (flash) memory. perfClearAlpaCrc Clear an AL_PA device CRC count by the port and AL_PA. perfClearFilterMonit Clear filter-based monitor counters. or perfDelEEMonitor Delete an end-to-end monitor on a port. perfDelFilterMonitor Delete a filter-based monitor. perfMonitorClear Clear statistics counters of end-to-end, filter-based, and ISL monitors on a port. perfMonitorShow Display end-to-end, filter-based, and ISL monitors on a port. perfSetPortEEMask Set overall mask for end-to-end (EE) monitors. perfShowAlpaCrc Display the AL_PA CRC count by port or by AL_PA. perfShowEEMonitor Show user-defined end-to-end monitors. perfttmon Add, delete, or display Top Talker monitors. 332 Administering Advanced Performance Monitoring