HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 254

Enabling and disabling connection redirection for load balancing 1. Connect to the switch and log in. 2. Enter the appropriate form of the iscsiSwCfg command for the operation you want to perform: • To enable connection redirection, use the iscsiSwCfg - -enableconn command. For 4/256 SAN Directors, the -s option can be used to enable connection redirection for specific slots, and the all option may be used to enable connection redirection for all slots. The following example enables connection redirection for ports on blades located in slots 3, 4, and 9. switch:admin> iscsiswcfg --enableconn -s 3,4,9 The operation completed successfully To disable connection redirection, use the iscsiSwCfg - -disableconn command. For the 4/256 SAN Director, the -s option can be used to disable connection redirection for specific slots, and the all option may be used to disable connection redirection for all slots. The following example disables connection redirection for ports on a blade located in slot 9. switch:admin> iscsiswcfg --disableconn -s 9 The operation completed successfully Displaying connection redirection status 1. Connect to the switch and log in. 2. Enter the iscsiSwCfg -showconn command with the -s all option to display the current status of connection redirection. The following is an example. switch:admin>iscsiswcfg --showconn -s all Number of records found: 2 Slot ICR Status 10 enabled 1 disabled switch:admin> 254 iSCSI Gateway services