HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 425

Displaying mode register bit settings The mode register bits are described in Table 94. Table 94 FICON CUP mode register bits POSC UAM ASM DCAM ACP HCP Programmed offline state control. When this bit is set on, the host is prevented from taking the switch offline. The default setting is 1 (on). User alert mode. When this bit is set on, a warning is issued when an action is attempted that will write CUP parameters on the switch. The default setting is 0 (off). Active=saved mode. When this bit is set on, all CUP configuration parameters are persistent, meaning that they will be saved in nonvolatile storage in the initial program load (IPL) file that is applied upon a cold reboot or a power cycle. The default setting is 1 (on). Switch clock alert mode. When this bit is set on, a warning is issued when the date, tsClockServer, or tsTimeZone commands are entered to set the time and date on the switch. The default setting is 0 (off). Alternate control prohibited. Because the Fabric OS CLI, Web Tools, and Fabric Manager are considered to be switch consoles, this bit has no effect on their operation. Attempts to set CUP parameters through SNMP are denied when this bit is set on. The default setting is 1 (on). Host control prohibited. When this bit is set on, the host is not allowed to set CUP parameters. The default setting is 0 (off). The ficoncupshow modereg command displays the mode register bit settings for the switch. A display of 0 indicates that the mode register bit is set to off; 1 indicates that the bit is set to on. The command format is: ficoncupshow modereg [bitname] where bitname is one of the mode register bits described in Table 94. To display all mode register bit settings for the switch: switch:admin> ficoncupshow modereg POSC UAM ASM DCAM ACP HCP 1 0 1 0 1 0 To display the mode register bit HCP for the switch: switch:admin> ficoncupshow modereg HCP HCP 0 Fabric OS 6.1.x administrator guide 425