HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 74

Each user group should be associated with a specific switch login role. For example, you should configure a user group for root, admin, factory, switchadmin, and user, and then add any users whose logins you want to associate to the appropriate group. • Configuring the server For more information and instructions on configuring the server, refer to the Microsoft website. Below is the information you will need to configure the RADIUS server for a HP StorageWorks switch. A client is the device that uses the RADIUS server; in this case, it is the switch. a. For the Add RADIUS Client window, provide the following: Client address (IP or DNS)-Enter the IP address of the switch. Client-Vendor-Select RADIUS Standard. Shared secret-Provide a password. Shared secret is a password used between the client device and server to prevent IP address spoofing by unwanted clients. Keep your shared secret password in a safe place. You will need to enter this password in the switch configuration. After clicking Finish, add a new client for all switches on which RADIUS authentication will be used. b. In the Internet Authentication Service window, right-click the Remote Access Policies folder; then select New Remote Access Policy from the pop-up window. A remote access policy must be created for each login role (Root, Admin, Factory, SwitchAdmin, and User) for which you want to use RADIUS. Apply this policy to the user groups that you already created. c. In the Vendor-Specific Attribute Information window, enter the vendor code value 1588. Click Yes, then click Configure Attribute... d. In the Configure VSA (RFC compliant) window, enter the following values and click OK. Vendor-assigned attribute number-Enter the value 1. Attribute format-Enter String. Attribute value-Enter the login role (Root, Admin, SwitchAdmin, User, etc.) the user group must use to log in to the switch. e. After returning to the Internet Authentication Service window, add additional policies for all login types for which you want to use the RADIUS server. After this is done, you can configure the switch. RSA RADIUS server Traditional password-based authentication methods are based on one-factor authentication, where you confirm your identity using a memorized password. Two-factor authentication increases the security that uses a second factor to corroborate identification. The first factor is either a PIN or password and the second factor is the RSA SecureID token. RSA SecurID with an RSA RADIUS server is used for user authentication. Our switch does not communicate directly with the RSA Authentication Manager, so the RSA RADIUS server is used in conjunction with the switch to facilitate communication. To learn more about how RSA SecurID works, visit www.rsa.com for more information. 74 Managing user accounts