HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 38
Inter-Chassis Link ICL licensing, 8Gb licensing
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Table 4 License requirements Feature QoS RADIUS RBAC Routing traffic Security SNMP SSH public key Top Talkers Traffic Isolation Trunking Two-factor authentication Two-to-four domains in a fabric USB usage Web Tools Zoning License Adaptive Networking No license required. No license required. No license required. This includes port-based or exchanged-based routing, static routes, frame-order deliver, and dynamic routes. No license required. Includes the DCC, SCC, FCS, IP Filter, and authentication policies. No license required. No license required. Advanced Performance Monitoring No license required. ISL Trunking or ISL Trunking Over Extended Fabrics No license required. Value Line (Two/Four) No license required. No license required. No license required. Where license should be installed Local switch and attached switches. n/a n/a n/a n/a n/a n/a Local switch and attached switches. n/a Local and attached switches. n/a Local switch. May be required on attached switches. n/a Local and any switch you want to manage using Web Tools. Local and attached switches; or any switch you want to use in a zone. Inter-Chassis Link (ICL) licensing ICL ports can be used only with an ICL license. After the addition or removal of a license, the license enforcement is performed on the ICL ports only when the portdisable and portenable commands are issued on the ports. An ICL license must be installed on both DC Directors forming the ICL connection. 8Gb licensing IMPORTANT: This license is installed by default. Do not remove it under any circumstances. The 8 Gbps licensing applies to the 8Gb SAN Switches. The following list describes the basic rules of using, adding, or removing 8Gb licenses. • Without an 8Gb license, even if there is an 8Gb SFP plugged into a port in an applicable platform, the port would be enabled only to run at a maximum speed of 4Gb. • In order to obtain an 8Gb license only the License ID from the switch will be required. When you add the 8Gb license, a portdisable and portenable on individual ports or a switchdisable and switchenable, for all ports, will have to be done to enable the 8 Gbps functionality on the ports. 38 Standard features