HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 448

Table 97 shows various combinations of existing fabrics, new switches added to those fabrics, and the recommended PID format for that combination. The criteria for the recommendations are first to eliminate host reboots, and second to minimize the need for a host reboot in the future. Table 97 PID format recommendations for adding new switches Existing Fabric OS versions; PID format 3.1.2 and later; Core PID 3.1.2 and later/4.2.0 and later; Core PID 3.1.2 and later/4.2.0 and later; Extended Edge PID Switch to be added Recommendations (in order of preference) 3.1.2 and later 1. Use Native PID format for new switch. Host reboot is not required. 2. Convert existing fabric to Core PID format, upgrading the version of Fabric OS, if necessary. Set Core PID format for new switch. Host reboot is required. 3. If devices are bound statically and it is not possible to reboot, convert existing fabric to Extended Edge PID format, upgrading the version of Fabric OS, if necessary. Use Extended Edge PID format for new switch. Host reboot is not required. 4.2.0 and later 1. Convert existing fabric to Core PID format, upgrading the version of Fabric OS, if necessary. Set Core PID format for new switch. Host reboot is required. 2. If devices are bound statically and it is not possible to reboot, convert existing fabric to Extended Edge PID format, upgrading the version of Fabric OS, if necessary. Use Extended Edge PID format for new switch. Host reboot is not required. 3.1.2 and later/4.2.0 Use Core PID for new switch. and later Host reboot is not required. 3.1.2 and later/6.0 Change fabric to Core PID. Extended Edge is not supported in Fabric OS 6.0. Host reboot is required. Evaluating the fabric If there is a possibility that your fabric contains host devices with static PID bindings, you should evaluate the fabric for the following items: • Find any devices that bind to PIDs. • Determine how each device driver will respond to the PID format change. • Determine how any multipathing software will respond to a fabric service interruption. If current details about the SAN are already available, it might be possible to skip the Data Collection step. If not, it is necessary to collect information about each device in the SAN. Any type of device might be able to bind by PID; each device should be evaluated before attempting an online update. This information has broad applicability, because PID-bound devices are not able to seamlessly perform in many routine maintenance or failure scenarios. 448 Configuring the PID format