HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 237

3. Use the uRouteShow command to display unicast routing information. Use the following syntax for the 4/8 SAN Switch, 4/16 SAN Switch, 8/8 SAN Switch, 8/24 SAN Switch, Brocade 4Gb SAN Switch for HP p-Class BladeSystem, Brocade 4Gb SAN Switch for HP c-Class BladeSystem, SAN Switch 4/32, 4/64 SAN Switch, SAN Switch 4/32B, 8/40 SAN Switch, 8/80 SAN Switch, and 400 MP Router: urouteshow [portnumber][, domainnumber] 4/256 SAN Director and DC SAN Backbone Director platforms: Use the following syntax: urouteshow [slot/][portnumber][, domainnumber] The following information displays: Local Domain ID The domain number of the local switch. In Port The port from which a frame is received. Domain The destination domain of the incoming frame. Out Port The port to which the incoming frame will be forwarded in order to reach the destination domain. Metric The cost of reaching the destination domain. Hops The maximum number of switch-to-switch links (ISLs) transversed to reach the destination domain. Flags An indication whether the route is dynamic (D) or static (S). A static route is assigned using the command uRouteConfig. Next (Dom, Port) The domain number and port number of the next hop. The following example displays the routing information of all the active ports: switch:admin> urouteshow Local Domain ID: 1 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 14 4 9 500 1 D 4,24 The next example displays the routing information for port 11 on slot 1: switch:admin> urouteshow 1/11 Local Domain ID: 3 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 11 2 0 1500 2 D 4,0 4 16 500 1 D 4,0 This example displays the routing information of port 11 to domain 4 only: switch:admin> urouteshow 1/11, 4 Local Domain ID: 3 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 11 4 16 500 1 D 4,0 Fabric OS 6.1.x administrator guide 237