HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 171
<hidden>
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
5. Respond to the prompts as follows: Protocol (scp or If your site requires the use of Secure Copy, specify scp. Otherwise, specify ftp. ftp) Server Name or IP Enter the name or IP address of the server where the file is stored; for example, Address 192.1.2.3. You can enter a server name if DNS is enabled. User name Enter the user name of your account on the server; for example, JohnDoe. File name Specify the full path name of the backup file; for example, /pub/configurations/config.txt Section Specify -all for the chassis, switch, or Logical Switches, or specify -chassis for the chassis only, -fid to download a switch configuration data to a Logical Switch specified by its fabric ID. This parameter is valid only in a Virtual Fabric environment and requires chassis permissions. Password Enter your account password for the server. Note that this is a required field even if you are logged in as an anonymous user; in such cases, the value may be ignored by the FTP service. 6. At the Do you want to continue [y/n] prompt, enter y. 7. Wait for the configuration to be restored. The following example shows configDownload run on a switch without Admin Domains: switch:admin> configdownload Protocol (scp, ftp, local) [ftp]: Server Name or IP Address [host]: 10.1.2.3 User Name [user]: joeUser File Name [config.txt]: Section (all|chassis|FID# [all]): all *** CAUTION *** This command is used to download a backed-up configuration for a specific switch. If using a file from a different switch, this file's configuration settings will override any current switch settings. Downloading a configuration file, which was uploaded from a different type of switch, may cause this switch to fail. A switch reboot might be required for some parameter changes to take effect. configDownload operation may take several minutes to complete for large files. Do you want to continue [y/n]: y Password: configDownload complete. Fabric OS 6.2 administrator guide 169