HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 224

NOTE: HP does not support the FA4-18 product. sw77:admin> firmwaredownload Type of Firmware (FOS, SAS, or any application) [FOS]: Server Name or IP Address: 192.168.32.10 Network Protocol (1-auto-select, 2-FTP, 3-SCP) [1]: User Name: userfoo File Name: /home/userfoo/v6.2.0 Password: Verifying the input parameters ... Verifying the system parameters for firmwaredownload.... The following AP blades are installed in the system. Slot Name Versions Traffic Disrupted 3 FC4-16IP v6.2.0 GigE 2 FA4-18 v6.2.0 Virtualization 4 FR4-18i v6.2.0 None 10 FR4-18i v6.2.0 None This command will upgrade both CPs and all AP blade(s) above. It will temporarily disrupt the specified traffic on the AP blade(s) when it activates the new firmware. If you want to upgrade a single CP only, please use -s option. You can run firmwareDownloadStatus to get the status of this command. This command will cause the active CP to reset and will require that existing telnet or SSH sessions be restarted. Do you want to continue [Y]: y The firmware is being downloaded to the Standby CP. It may take up to 10 minutes Do you want to continue [Y]: y 222 Installing and maintaining firmware