HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 225
output on the HP StorageWorks 4/256 SAN Director.
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
10. As an option, after the failover, connect to the switch, and log in again as admin. Using a separate session to connect to the switch, enter the firmwareDownloadStatus command to monitor the firmware download status. sw77:admin> firmwareDownloadstatus [1]: Thu Mar 06 00:30:49 2008 Slot 2 (SAS): Firmware is being downloaded to the blade. It may take up to 30 minutes. [2]: Thu Mar 06 00:30:49 2008 Slot 7 (SAS): Firmware is being downloaded to the blade. It may take up to 30 minutes. [3]: Thu Mar 06 00:30:49 2008 Slot 2 (SAS): Firmware has been downloaded successfully to the blade. [4]: Thu Mar 06 00:30:49 2008 Slot 7 (SAS): Firmware has been downloaded successfully to the blade. [5]: Thu Mar 06 00:30:49 2008 Slot 2 (SAS): Blade is rebooting. [6]: Thu Mar 06 00:30:49 2008 Slot 7 (SAS): Blade is rebooting. [7]: Thu Mar 06 00:30:49 2008 Slot 2 (SAS): Firmware commit is started. [8]: Thu Mar 06 00:30:49 2008 Slot 7 (SAS): Firmware commit is started. [9]: Thu Mar 06 00:30:49 2008 Slot 2 (SAS): Firmware commit has completed. [10]: Thu Mar 06 00:30:49 2008 Slot 7 (SAS): Firmware commit has completed. (Firmwaredownload has completed.) 11. Enter the firmwareShow command to display the new firmware versions. The following is an example of firmwareShow output on the HP StorageWorks 4/256 SAN Director. Fabric OS 6.2 administrator guide 223