HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 382
portcfgshow 7/10, portcfgpersistentenable 7/10, portcfgexport 7/10
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
3. Determine whether to set up FC Router port cost operations and/or ISL or EX-Port trunking. These options include FC Router port cost operations and setting up either ISL or EX_Port trunking. For information about using FCR Router Port Cost operations, see "FC Router port cost configuration" on page 383 and for information on trunking setup, see "Configuring EX_Port frame trunking" on page 385. 4. Enter the portEnable command to enable the ports that you disabled in step 1. You can now physically attach ISLs from the Fibre Channel Router to the edge fabric. switch:admin> portenable 7/10 5. Enter the portCfgShow command to view ports that are persistently disabled. switch:admin> portcfgshow 7/10 Area Number: 74 Speed Level: AUTO Trunk Port OFF Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON EX Port ON Mirror Port ON FC Fastwrite ON 6. After identifying such ports, enter the portCfgPersistentEnable command to enable the port, and then the portCfgShow command to verify that the port is enabled. switch:admin> portcfgpersistentenable 7/10 switch:admin> portcfgshow 7/10 Area Number: 74 Speed Level: AUTO Trunk Port OFF Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON EX Port ON Mirror Port ON FC Fastwrite ON 7. Enter either the portCfgEXPort or portShow command to verify that each port is configured correctly: switch:admin> portcfgexport 7/10 380 Using the FC-FC routing service