HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 66

3. Wait until you see the following message: DCX:FID128:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]?y HA is disabled Stopping blade 10 Shutting down the blade.... Stopping blade 12 Shutting down the blade.... Broadcast message from root (pts/0) Fri Oct 10 08:36:48 2008... The system is going down for system halt NOW !! 4. Power off the switch. High availability of daemon processes Fabric OS 6.0 supports automatic restart of non-critical daemons. Starting these non-critical daemons is automatic; you cannot configure the startup process. The following sequence of events occurs when a non-critical daemon fails: 1. A RASlog and AUDIT event message is logged. 2. The daemon is automatically started again. 3. If the restart is successful, another message is sent to RASlog and AUDIT reporting the successful restart status. 4. If the restart fails, another message is sent to RASlog and no further attempts are made to restart the daemon. Schedule downtime and reboot the switch at your convenience. The following table lists the daemons that are considered non-critical and are automatically restarted on failure. Table 7 Daemons that are automatically restarted Daemon Description arrd Asynchronous Response Router (used to send management data to hosts when the switch is accessed through the APIs (FA API or SMI-S). cald Common Access Layer Daemon (used by Manageability Applications). raslogd rpcd Reliability, Availability, and Supportability daemon logs error detection, reporting, handling, and presentation of data into a format readable by management tools and the user. Remote Procedure Call daemon used by the API (Fabric Access API and SMI-S). scpd SAS CP daemon. snmpd traced trackd webd Simple Network Management Protocol Daemon. Trace Daemon. Provide trace entry date/time translation to Trace Device at startup and when date/time changed by command. Maintains the trace dump trigger parameters in a Trace Device. Performs the trace Background Dump, trace automatic FTP, and FTP "aliveness check" if auto-FTP is enabled. Track Changes Daemon. Webserver daemon used for WebTools (includes httpd as well). 66