HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 296

Enabling platform services 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the msplMgmtActivate command. switch:admin> msplmgmtactivate Request to activate MS Platform Service in progress...... *Completed activating MS Platform Service in the fabric! switch:admin> Disabling platform services 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the msplMgmtDeactivate command. 3. Enter y to confirm the deactivation. switch:admin> msplmgmtdeactivate MS Platform Service is currently enabled. This will erase MS Platform Service configuration information as well as database in the entire fabric. Would you like to continue this operation? (yes, y, no, n): [no] y Request to deactivate MS Platform Service in progress...... *Completed deactivating MS Platform Service in the fabric! switch:admin> Management server database You can use the msConfigure command to control access to the management server database. An access control list (ACL) of WWN addresses determines which systems have access to the management server database. The ACL typically contains those WWNs of host systems that are running management applications. If the list is empty (the default), the management server is accessible to all systems connected in-band to the fabric. For more access security, you can specify WWNs in the ACL so that access to the management server is restricted only to those WWNs listed. NOTE: The management server is Logical-Switch-capable. All management server features are supported within a Logical Switch. Displaying the management server ACL 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the msConfigure command. The command becomes interactive. 3. At the select prompt, enter 1 to display the access list. A list of WWNs that have access to the management server is displayed. 294 Configuring the Distributed Management Server