HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 319
Mapping LUNs on a specific port to an iSCSI VT
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
-l Maps the physical FC LUNs to virtual iSCSI LUNs and is specified as a pair: LUNs:physical LUNs The following is an example: switch:admin> iscsicfg --add lun -t iqn.2002-12.com.brocade:example-disk001 \ -w 21:00:00:04:cf:e7:73:7e -l 0:0 The operation completed successfully. 6. Enter the iscsiCfg --show lun command with -t options to verify that the LUN has been added to the iSCSI VT, where -t is the IQN that identifies the iSCSI VT. The following is an example. switch:admin> iscsicfg --show lun -t iqn.2002-12.com.brocade:example-disk001 Number of targets found: 1 Target: iqn.2006-10.com.example:disk001 Number of LUN Maps: 1 FC WWN Virtual LUN(s) 21:00:00:04:cf:e7:73:7e 0 Physical LUN(s) 0 Mapping LUNs on a specific port to an iSCSI VT 1. Connect to the switch and log in. 2. Enter the iscsiCfg --add lun command with -t , -w , and -l options to add LUNs attached to a specific port device to an iSCSI VT where: -t Specifies the unique IQN name for the iSCSI VT in the format: iqn.2002-12.com.brocade:. -w Specifies the port WWN of the physical FC target -l Maps the physical FC LUNs to virtual iSCSI LUNs and is specified as a pair: LUNs:physical LUNs The following example maps two LUNs attached to port 2f:ff:00:06:2b:0d:12:99 to an iSCSI VT named iqn.2002-12.com.brocade:example-disk001. switch:admin> iscsicfg --add lun -t iqn.2002-12.com.brocade:example-disk001 \ -w 2f:ff:00:06:2b:0d:12:99 -l 1-2:0-1 The operation completed successfully. switch:admin> iscsicfg --show lun -t iqn.2002-12.com.brocade:example-disk001 Number of targets found: 1 Target: iqn.2002-12.com.brocade:example-disk001 Number of LUN Maps: 2 FC WWN Virtual LUN(s) 21:00:00:04:cf:e7:73:7e 0 2f:ff:00:06:2b:0d:12:99 1-2 Physical LUN(s) 0 0-1 Fabric OS 6.2 administrator guide 317