HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 486

3. Verify that the VE_Port or VEX_Port is online, use the switchShow command to view and verify that the FCIP tunnel is online. switch:admin06> portenable 8/18 switch:admin06> portenable 8/19 switch:admin06> switchshow switchName:switch switchType:42.2 switchState:Online switchMode:Native switchRole:Subordinate switchDomain:4 switchId:fffc04 switchWwn:10:00:00:60:69:80:0d:bc zoning:ON (LSAN001) switchBeacon:OFF blade3 Beacon: OFF blade4 Beacon: OFF blade8 Beacon: OFF FC Router:ON FC Router BB Fabric ID:1 Area Slot Port Media Speed State 32 3 0 id N4 Online F-Port 50:03:0d:30:0d:13:00:09 33 3 1 id N4 Online F-Port 50:03:0d:30:0d:13:00:11 34 3 2 id N4 Online F-Port 50:03:0d:30:0d:13:00:13 35 3 3 id N4 Online F-Port 50:03:0d:30:0d:13:00:15 36 3 4 id N2 Online F-Port 21:00:00:e0:8b:08:bd:20 210 8 18 -(downstream) -- Online VE-Port 50:00:51:e3:51:55:3f:1e "fcr_xd_3_16" 211 8 19 -(downstream) -- Online VE-Port 50:00:51:e3:70:42:5f:76 "fcr_xd_5_17" 223 8 31 -- -- Offline 8 ge0 id 1G Online 8 ge1 id 1G Online Enabling persistently disabled ports Before an FCIP tunnel can be used, the associated ports must be persistently enabled. NOTE: VEX_Port Users: If the fabric is already connected, you must leave the ge0 and ge1 ports disabled until after you have configured the VEX_Port; this will prevent unintentional merging of the two fabrics. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the portCfgShow command to view ports that are persistently disabled. 3. After identifying the ports, enter the portCfgPersistentEnable command to enable the ports. 482 Configuring and monitoring FCIP extension services