HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 402

In Fabric OS 5.3.0 and later, you can have 3000 LSAN zones configurable up to a maximum of 5000. On a dual-CP switch, both CPs must have 5.3.0 code or later to select 5000. If the active CP is running Fabric OS 5.3.0 or later with a maximum count of 5000 LSANs and the standby CP is running an earlier firmware version, HA synchronization will fail. If 5000 is selected before downgrading to an earlier version of Fabric OS, you are prompted to go back to the default maximum LSAN count of 3000. • For Proxy Device Slots, the physical and proxy devices use the 10000 device slots. The information shows the maximum pool size for translate phantom node and port WWNs and shows the number of translate node and port WWNs from this pool. • Phantom Node WWN • Phantom Port WWNs • Max proxy devices • Max NR_Port The following example shows the use of the fcrResourceShow command to display physical port (EX_Port) resources. switch:admin> fcrresourceshow Daemon Limits: Max AllowedCurrently Used LSAN Zones: 300028 LSAN Devices: 1000051 Proxy Device Slots: 1000020 WWN Pool SizeAllocated Phantom Node WWN: 8192 5413 Phantom Port WWN: 3276816121 Port Limits: Max proxy devices: 2000 Max NR_Ports: 1000 Currently Used(column 1: proxy, column 2: NR_Ports): 0 | 0 34 1 | 3 34 4 | 0 0 5 | 0 0 6 | 0 0 7 | 0 0 8 | 6 34 9 | 6 34 10 | 6 34 11 | 6 34 12 | 6 34 13 | 6 34 14 | 6 34 15 | 6 34 16 | 8 34 17 | 8 34 18 | 8 34 19 | 8 34 20 | 8 34 21 | 8 34 22 | 8 34 23 | 8 34 400 Using the FC-FC routing service