HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 61

The status of the track changes feature is displayed as either on or off. The display includes whether or not the track changes feature is configured to send SNMP traps. switch:admin> trackchangesshow Track changes status: ON Track changes generate SNMP-TRAP: NO switch:admin> Viewing the switch status policy threshold values The policy parameter determines the number of failed or inoperable units for each contributor that triggers a status change in the switch. Each parameter can be adjusted so that a specific threshold must be reached before that parameter changes the overall status of a switch to MARGINAL or DOWN. For example, if the FaultyPorts DOWN parameter is set to 3, the status of the switch will change if 3 ports fail. Only one policy parameter needs to pass the MARGINAL or DOWN threshold to change the overall status of the switch. For more information about setting policy parameters, see the Fabric Watch Administrator's Guide. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the switchStatusPolicyShow command. Whenever there is a switch change, an error message is logged and an SNMP connUnitStatusChange trap is sent. The output is similar to the following: switch:admin> switchstatuspolicyshow The current overall switch status policy parameters: Down Marginal PowerSupplies 3 0 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 Setting the switch status policy threshold values 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the switchStatusPolicySet command. The current switch status policy parameter values are displayed. You are prompted to enter values for each DOWN and MARGINAL threshold parameter. NOTE: By setting the DOWN and MARGINAL values for a parameter to 0,0 that parameter is no longer used in setting the overall status for the switch. 3. Verify the threshold settings you have configured for each parameter. 4. Enter the switchStatusPolicyShow command to view your current switch status policy configuration. HP StorageWorks 4/8 and 4/16 SAN Switch, HP StorageWorks 8/8 and 8/24 SAN Switch, HP StorageWorks 4/32 SAN Switch, Brocade 4Gb SAN Switch for HP p-Class BladeSystem, Brocade 4Gb SAN Switch for HP c-Class BladeSystem, Brocade 8Gb SAN Switch for HP BladeSystem c-Class, HP StorageWorks 4/32 SAN Switch, HP StorageWorks 4/64 SAN Switch, HP StorageWorks 4/32B Fabric OS 6.2 administrator guide 61