HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 468

The example below shows all of the IKE policies defined; in this example, there are two IKE policies. switch:admin> policy --show ike all IKE Policy 1 Authentication Algorithm: MD5 Encryption: 3DES Perfect Forward Secrecy: off Diffie-Hellman Group: 1 SA Life (seconds): 0 IKE Policy 32 Authentication Algorithm: SHA-1 Encryption: AES-128 Perfect Forward Secrecy: on Diffie-Hellman Group: 1 SA Life (seconds): 28800 Operation Succeeded Deleting an IKE and IPsec policy Policies cannot be modified. You must delete and then re-create a policy with the new parameters. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the following command. policy --delete type number where type is the policy type and number is the number assigned. For example, to delete the IPsec policy number 10: switch:admin> policy --delete ipsec 10 The policy has been successfully deleted. Viewing IPsec information for an FCIP tunnel 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the portShow fcipTunnel command. 464 Configuring and monitoring FCIP extension services