HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 378

• If you are not configuring an HP StorageWorks 4/256 SAN Director, HP StorageWorks DC SAN Backbone Director, or HP StorageWorks DC04 SAN Director Switch platform, skip to step 5. switch:admin> slotshow -m Slot Blade Type ID Model Name Status 1 AP BLADE 33 FA4-18 ENABLED 2 AP BLADE 24 FR4-18i ENABLED 3 SW BLADE 37 FC8-16 ENABLED 4 SW BLADE 39 FC10-6 ENABLED 5 CORE BLADE 52 CORE8 ENABLED 6 CP BLADE 50 CP8 ENABLED 7 CP BLADE 50 CP8 ENABLED 8 CORE BLADE 52 CORE8 ENABLED 9 SW BLADE 37 FC8-16 ENABLED 10 SW BLADE 55 FC8-32 ENABLED 11 UNKNOWN VACANT 12 SW BLADE 51 FC8-48 ENABLED See Chapter 10, "Configuring Enterprise-class platforms" on page 267 for a list of blades and their corresponding IDs. 3. If you are configuring the HP StorageWorks 4/256 SAN Director with a B-Series Multi-Protocol Router Blade, enter the chassisConfig command to verify that the director is using configuration option 5. switch:admin> chassisconfig Current Option: 5 All Supported Options Option 5: One 384-port switch Blade ID's 17, 18, 24, 31, 36, 39, 37, 51, 55 in slots 1-4, 7-10 Blade ID 16 in slots 5-6 4. If you are configuring EX_Ports on the 8-Gb/s port blades on the HP StorageWorks DC SAN Backbone Director or HP StorageWorks DC04 SAN Director Switch (HP StorageWorks SAN Director 16 Port 8Gb FC blade, HP StorageWorks SAN Director 32 Port 8Gb FC blade, or HP StorageWorks SAN Director 48 Port 8Gb FC blade), enter the licenseShow command to verify that the Integrated Routing license is installed. switch:admin> licenseshow S9bddb9SQbTAceeC: Fabric license bzbzRcbcSc0c0SY: Remote Fabric license RyeSzRScycazfT0G: Integrated Routing license If the Integrated Routing license is not installed, you must install it, as described in Chapter 1. "Performing basic configuration tasks" on page 29. 376 Using the FC-FC routing service