HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 226
Firmware download from a USB device
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
NOTE: HP does not support the FA4-18 product. switch:admin> firmwareshow Slot Name Appl Primary/Secondary Versions Status 2 FA4-18 FOS v6.2.0 v6.2.0 SAS v3.3.0 v3.3.0 DMM v3.3.0 v3.3.0 5 CP0 FOS v6.2.0Standby * v6.2.0 6 CP0 FOS v6.2.0Active v6.2.0 7 FA4-18 FOS v6.2.0 v6.2.0 SAS v3.3.0 v3.3.0 DMM v3.3.0 v3.3.0 * Local CP Note: If Local CP and Remote CP have different versions of firmware, please retry firmwaredownload command. Firmware download from a USB device The HP StorageWorks 8/8 and 8/24 SAN Switches, HP StorageWorks 8/40 SAN Switch, HP StorageWorks 8/80 SAN Switch switches and the HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director Switch support a firmware download from an HP StorageWorks B-Series 2G USB Drive attached to the switch or active CP. Before the USB device can be accessed by the firmwareDownload command, it must be enabled and mounted as a file system. The firmware images to be downloaded must be stored under the relative path from /usb/usbstorage/brocade/firmware or using the absolute path in the USB file system. Multiple images can be stored under this directory. There is a firmwarekey directory in which the public key signed firmware is stored. When the firmwareDownload command line option, -U (upper case), is specified, the firmwareDownload command downloads the specified firmware image from the USB device. When specifying a path to a firmware image in the USB device, you can specify only the relative path to /firmware or the absolute path. Enabling USB 1. Log in to the switch using an account assigned to the admin role. 2. Enter the following command: usbstorage -e Viewing the USB file system 1. Log in to the switch using an account assigned to the admin role. 224 Installing and maintaining firmware