HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 308

connection redirection for specific slots, and the all option may be used to disable connection redirection for all slots. The following example disables connection redirection for ports on a blade located in slot 9. switch:admin> iscsiswcfg --disableconn -s 9 The operation completed successfully Displaying connection redirection status 1. Connect to the switch and log in. 2. Enter the iscsiSwCfg --showconn command with the -s all option to display the current status of connection redirection. The following is an example. switch:admin> iscsiswcfg --showconn -s all Number of records found: 2 Slot ICR Status 10 enabled 1 disabled switch:admin> Supported iSCSI initiators Table 73 lists iSCSI initiators supported by the iSCSI gateway service. Table 73 Supported iSCSI initiators iSCSI initiator driver versions Windows • MS iSCSI initiator 2.02 • MS iSCSI initiator 2.03 • MS iSCSI initiator 2.04 Linux • RH EL 4 default initiator • 2.6.10 - 4.0.2 iSCSI initiator (SourceForge,Net initiator) • 2.4.20 - 3.6.2 iSCSI initiator (SourceForge,Net initiator) • SUSE 9 • SUSE 10 Solaris • iSCSI is built-in with the 5.11 with the latest Solaris Express release AIX • iSCSI is built-in in the 5.3 ML4 HP-UX • 11i v1 - B.11.23.03e • 11 iv2 - B.11.23.03e NIC/TOE cards iSCSI HBAs • Alacritech SES2002XT • Qlogic 4050c Checklist for configuring iSCSI After you install the HP StorageWorks B-Series iSCSI Director Blade in the HP StorageWorks 4/256 SAN Director (see the Brocade FC4-16IP Hardware Reference Manual), you configure the iSCSI gateway 306 iSCSI gateway service