HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 43
Licensed features
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5. Enter a unique domain ID at the Domain prompt. Use a domain ID value from 1 through 239 for normal operating mode (FCSW compatible): Domain: (1..239) [1] 3 6. Respond to the remaining prompts, or press Ctrl-d to accept the other settings and exit. 7. Enter the switchEnable command to re-enable the switch. Licensed features Feature licenses may be part of the licensed paperpack supplied with your switch software; if not, you can purchase licenses separately from your switch vendor, who will provide you with transaction keys to unlock the features. License keys are provided on a per-product and per-feature basis. Each switch within a fabric needs its own licensing. To preserve licenses on your switch, perform a configUpload before upgrading or downgrading your Fabric OS. If you downgrade your Fabric OS to a version earlier than 6.2.0, some licenses associated with specific features of Fabric OS 6.2.0 may not work. Licences can be associated with a feature version. If a feature has a version-based license, that license is valid only for a particular version of the feature. If you want a newer version of the feature, you must purchase a new license. • Version upgrade: For example, a zoning license that is for Fabric OS version 6.0.0 is added. You can add another zoning license with a version later than 5.2.0 without removing the zoning license for Fabric OS 5.2.0. Upgrading is allowed, but downgrading is not supported. If a license is not version-based, it is valid for all versions of the feature. Table 4 lists the licenses that must be installed on the local switch and any connecting switches to use the feature. Table 4 License requirements Feature License Where license should be installed Administrative Domains Configuration up/download No license required. n/a No license required. n/a Configupload or configdownload is a command and comes with the OS on the switch. Diagnostic tools No license required. n/a Distributed No license required. n/a Management Server EX_Ports Extended Fabrics Integrated Routing Extended Fabrics Local switch. Local switch and attached switches. FC Fastwrite FCIP FICON FC-IP Services or High Performance Extension over FCIP/FC FC-IP Services or High Performance Extension over FCIP/FC No license required. Local and attached switches. Local and attached switches. License is needed on both sides of tunnel. n/a FICON-CUP FICON Tape Read and Write Emulation over an FCIP Tunnel FICON Management Server FICON Tape High-Performance Extension over FCIP/FC license Local switch. Local and attached switches. Fabric OS 6.2 administrator guide 43