HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 513

Uploading the configuration files See Chapter 5, "Maintaining the switch configuration file" on page 163 for more information on the configUpload command. When you execute the configUpload command, all the files saved in the file access facility are uploaded to a management workstation (there is a section in the uploaded configuration file labeled "FICON_CUP" that exists in an encoded format). Downloading configuration files with Active=Saved mode enabled See Chapter 5, "Maintaining the switch configuration file" on page 163 for more information on the configDownload command. The contents of existing files saved on the switch, which are also present in the "FICON_CUP" section, are overwritten. The files in the "FICON" section of the configuration file, which are not currently on the switch, are saved on the switch. The IPL will not be replaced because Active=Saved mode is enabled. A warning message is displayed in the event log to warn users that the IPL will not be overwritten. Downloading configuration files with Active=Saved mode disabled See Chapter 5, "Maintaining the switch configuration file" on page 163 for more information on the configDownload command. The contents of existing files saved on the switch, which are also present in the "FICON_CUP" section, are overwritten. The files in the FICON section of the configuration file, which are not currently on the switch, are saved on the switch. The IPL is replaced because Active=Saved mode is disabled. Configuration information record You can use the following worksheet for recording FICON configuration information. Table 99 FICON configuration worksheet FICON® Switch Configuration Worksheet FICON® Switch Manufacturer Type: _________ Model: ______ S/N: ________ HCD Defined Switch ID_________(Switch ID) FICON® Switch Domain ID_________(Switch @) Cascaded Directors No _____Yes _____ Corresponding Cascaded Switch Domain ID _____ Fabric Name FICON® Switch F_Ports Attached N_Ports / E_Ports (CU, CPC, or ISL) Slot Port Numb Numb er er Port Addre ss Laser Type: LX / SX Port Name Node Type CU / CHNL Machi ne Type Model Serial Number ISL CU I/F CPC CHPID Fabric OS 6.2 administrator guide 509